Northern Wilderness Skills and Traditions
Time 2021-10-19 06:05:44Web Name: Northern Wilderness Skills and Traditions
WebSite: http://northernwildernesskills.blogspot.com
ID:207148
Keywords:
Wilderness,Northern,Skills,Traditions,and,Description:
keywords: description:A Skäri - Living Heritage educational project.
1. A reconstructed seal-iron, which essentially is an harpoon used by sealhunters in the Åboland archipelago. Själ is the common word for seal in the east-Swedish dialect spoken along the coast of Southwest Finland. The word also referes to asoul or aspirit. There has been many stories in local folklore of seals being the reincarnations of people lost at sea. Seals have, nevertheless, had an important role in the livelihood and culture of coastal peoples in Finland, Sweden and Estonia. Several studies of traditional sealhunting in the northern Baltic Sea have been undertaken by Swedish and Finnish ethnographers and historians. The seal hunting traditions of the Gulf of Boothnia between Sweden and Finland have received a lot of scholary attention as sealhunting in that area was an important source of income an a very integral part of community life well in to the 20th century. There is a wealth of information available on this subject, however a langugage barrier has made it difficult for people not fluent in Finnish or Swedish to partake in this material. Still today very little of this has been translated to English.
Although many of the impliments and techniques used in sealing are similar across the northern Baltic, there are a many localized variations in the manner of how and when seals were pursued. There are also regional variations in terminology regarding seals and seal hunting. Swedish speaking coastal communities in the areas of Finland, Sweden and Estonia were active pursuers of seals in the northern Baltic region. Seal hunting was, however, not exclusive to Swedish maritime culture as Finnish speaking communities along the Bay of Bothnia, the province of Satakunta as well as the east part of the Gulf of Finland in the Saimaa lake-system and Ladoga, also engaged in sealing.
2. Main seal hunting areas in the Baltic Sea.
This article presents a summerized history of seal hunting in the northern part of the Baltic Sea. For the purpose of making it easier for fellow academics to find the exact sources I have employed the Harvad In-text referencing system in this post. The published sources cited in the article are predominately written in Swedish or in Finnish.
Prehistory of seal hunting in FinlandHistorically, seal hunting has been a significant mean of livelihood for people living on the coast of Finland. Stone Age-people were quick to settle in the newly formed islands of the Southwestern Archipelago in Finland as result of the post-glacial rebound after the last Ice Age. Seal hunting and fishing provided a lifeline for the first permanent inhabitants on the islands and the coast of Finland.
3. A 21cm long harpoon head was found within the remains of a harp seal in Närpes, Finland . The seal had been harpooned in winter in its brething hole in the Gulf of Bothnia, some 17km from the coast. The seal was mortally woundend and sunk to the bottom around 4000BC. The harpoon is made of elk leg bone. KM10087:1, NBA.
The Fagervik site in Pargas in the Åboland Archipelago is believed to be a neolithic sealhunter-camp. A stone encircled fireplace and fragmets of quartz and clay pots were recovered at the site. Pieces of burnt sealbone was also found, indicating that the people did sustain themselves on seals. The site was dated to 2800-2450 BC. (Asplund 2000:14-25). Much older seal hunter habitation sites are found in the Åland Islands, going back as far as to 5000 BC (Storå 2001).
4. Locations were neolithic bone seal harpoons have been recovered in Finland.
Evidence of three different species of seals are found among the archaeological material from several neolithic sites in the Åland-Åboland archipelago; the grey seal (Halichoerus grypus), the ringed seal (Phoca hispida) and the harp seal (Pagophilus groenlandicus). The harp seal population was reduced during the late Neolithic period and was completely gone by the end of the Bronze age at 500 BC (Wallin Sten 2007). Some sources do claim that the harp seal survived in the northern Baltic Sea until the early Middle Ages.
5. Overhunting can in part have caused the disapperence of the Harp seal from the Baltic Sea Basin.
The ringed seal and grey seal were hunted well in to the 20th century an were at the time classified as vermin due to their impact on fisheries. A overhunting of the population in combination with low fertility rates caused by environmental pollution resulted in a population decline and a ban on all hunting. Today licensed hunt of grey seals in Finland is allowed.
6. Medieval sealhunters on the pack ice of the Gulf of Boothnia by the Swedish geographer and historian Olaus Magnus. published by Antoine Lafréry in 1572
Seals were hunted intensively during the Middle Ages in the North Baltic Sea. Seal meat was at the time a valuable commodity, stored and salted in barrels. Its popularity as food was in part due to the Catholic Church which viewed seal as fish, thus making it available for consumtion during periods of fasting. The economic significance of seal meat is supported by the mention of seal tithes from Åland in the 1330s (Talve 1997:75). Further records also indicate that seal hunters in the Gulf of Bothnia were taxed as early as in the 14th century. Seals were pursued mainly with harpoons, but there is evidence for the use of clubs and it was also possible that nets were used to either trap or catch seals.
Hunting methods Seal netsThe first historic accounts of nets used for catching seal derive from the 18th century, although there is archaeologal evidence for the use of seal net as early as from the late Mesolithic in Finland. On the Swedish island of Gotland two types of nets were used for cathing seal; standing nets (Ståndnät Swe.) and laying nets (Liggnät Swe). Locally nets were referred to as stubbar. Flat rocks along the coastline, at a distance of 50-100 meters from the shore would attract seals that used the stones frequently for resting. In some cases special wood frame boxes filled with rocks were erected close to the shore by farmers to attract seals. Seals resting on the rocks would be caught with nets. The standing net was placed in a half circle around the stone on the sea side. The seal would approach the rock from the beach side and crawl up facing the sea. If the seal was startled it would dive in on the sea side of the rock and get tangled in the net.7. A seal net hanging in Gåshälan, Närpes, Fnland in 1926.
The laying net, also known as slagnät, was placed around the seal rock in a circular fashion and tied to two turning beams which were anchored down on the outer and inner sides of rock. This type of net was made out of coarser thread and had smaller mesh size than the standing net as the function of this net was to hinder the seal from escaping, rather than entangel it. The inward beam was tied to a rope which reached the beach. The net was laying on the bottom as the seal approached the rock. Once the seal was laying on the rock the hunter would pull the rope lifting the net to the surface and effectively entrapping the seal in what would appear a net-basket.(Klein 1930:142-143, Wallin Sten 2007:32)
8. The Ostrobothnian Long Net.
Johannes Tengström recognised four different types of seal nets that were in use in the Gulf of Bothnia in a academic paper he wrote in 1747; (1) long net, (2) barrage net, (3) cross net and a (4) pole-long net combination. The long nets were set next to steep seaside cliffs, one end towards the land and the other towards the sea. The barrage net was set in a half-circle around the seal shallows at the edge of the sea. The shorter and deeper cross net was used in wintertime in cracks and holes in the ice, as the seals stayed near these. The pole-long net combination consisted of several nets attached to a pole and was used in inlets and gulfs where there were ringed seals.
By the end of the 19th century only one type of long net remained in use in the Gulf of Bothnia. In the Åboland archipelago a net with a 30cm wide mesh was used for catching seal, mainly ringed seal. The net was around 10 meters long and 3 meterswide. Typically nets used in Ostrobothnia had large, clublike floats.9. An Åboland seal net with wooden winter floats, called dolls in Korpo Local History Museum. Thenets used in the Åboland archipelago as well as parts of the Åland Islands andthe Roslagen archipelago were equipped with two types of wooden floats. The more common floatwas a straight piece of spruce, around 30 cm long. The float tapered towardsthe ends and was scorched to keep it from rotting. Typically seals were hunted with nets inlate autumn as days became darker and seals were not able to see the netsunder water. The smaller ringed seals were more commonly caught in nets than thelarge grey seals. Gunnar Andersson, a native of Utö island in the Åboland archipelago, maintained that when the seal, which more often was a ringed seal, swims in to the net and feels it brush against its snout, will immediately start to twist its body like a cork screw in order to untangle itself. At this point the ends of thefloats will tangle in the mesh and the net wraps thightly around the seal, effectively immobilizing it and therefore drowning it. The net was attached to a rock or another object so that the drowned seal could be retrevied.
10. Owners mark on the float of a open water sealnet from Pargas. The spruce floats were often scorched to prevent rotting.
Another type of wooden net floats, the dolls (Swe. dockor) wereused when nets were set under ice. The anchor shaped floats would not get caught in the ice as easily as the straight ones. As winter approached it was believed that ringed seals would approach land as the first snow fell to look at the snow. Ringed seals give birth to their cubs on sea ice and it is possible that seals are indeed curious to know if the snowy beach is land or an ice sheet. Nets were often placed across channels and narrowsstraight which the seals were known to use. At the Island of Jurmo the netswere pushed out from the shore using long staves.(Andersson 2008)
TrappingSeals were also trapped using large steel traps. The trap was attached to a weighted wooden frame and baited with fish. The trap set and placed under water, often in connection with fishing nets that had been visited by hungry seals (Gustafsson 1971). This was also an effective method to remove problem seals and deter others from approaching fishing nets.
11. A sealtrap with complete wooden frame and how it is set by baiting it with fish and sinking it below the surface.
A type of framed net-cage or a weir were used to catch ringed seals in along the east coast of Sweden. These traps were baited with fish and set afloat. When the seal swam in to the trap and pulled on the bait the lid would fall down and trap the seal (Klein 1929:143).
12. Seal weir from Gävle, Sweden. Clothing Seal hide was used for clothing and bags, but inlater times shoes made of sealskin were the trademark signature of peopleliving in the outer archipelago. People born in sealing communities before orduring WW2 remember that it was common to use seal skin shoes during theirchildhood. The sealskin shoes or moccasins (Swe: Sälskor), were renowned for their ability towithstand wet, but because they were made out of untanned hides theshoes were prone to stiffen. To soften them people would pour water mixed withtar inside the shoes. Sealfat could be boiled to produce seal oil which wasalso an important commodity. It was commonly used mixed in to paint. Seal oilwas also used as feed to livestock such as pigs and horses during winter.
13. Sealskin shoes or moccasins were a common and practical piece of clothing. The Fishing and Hunting museum of Bosund.
Ice hunting Sealhuntingwas more intensive in the Gulf of Bothnia were boatloads of hunters from Swedenand Finland would spend weeks at a time hunting for seals on the pack ice inthe early spring months.In Åboland hunting remained more small-scale and alsomore primitive. The harpoon remained an important weapon in Åboland and theseal spear (Swe. väckare) which was used in the Gulf of Bothnia was virtuallyunknown in the archipelago. Typically seals were hunted by villages andcommunities in the outer rim of the archipelago. During winter hunters wouldventure in small numbers on to the ice,14. A hunter laying on top of his Skridstång while aiming his rifle at a seal laying besideside its breathing hole. Gulf of Bothnia around 1900 The methods usedfor sealing both varied depending on the season and location. In the Gulf ofBothnia and the Kvarken seals were mainly hunted on the pack ice. Kvarken (Swe. Kvarken) is the narrow region in the Gulf of Bothnia separating the Bothnian Bay from the Bothnian Sea. The distance from Swedish mainland to Finnish mainland is around 80 km. The Kvarken seal hunters hunting grounds extended from the northern islands in the Sea of Åland to the Bay of Bothnia in the north. Sealing was an important source of rewenue for the Swedish crown, made evident in King Gustavus Vasas open letter of 1551 to the Ostrobothnians in which the king granted the hunters the right to pursue seals throughout the Gulf of Bothnia, including its western parts. The voyages the hunters undertook on the spring ice could last for months. These voyages were called Fälan (Swe.) Thanks to the long-distance option, the hunters were not dependent on local or regional ice conditions; they would go and find the areas where there were seals available. In normal winters, hunting started in the south and proceeded along the coast of Sweden northwards towards the Bay of Bothnia. The hunt continued until the ice melted completely. If the catch was good early on, the hunters could return home and prepare for another trip.
15. A sealspear (väckare) on top, a three prong hook for catching the mother seal and a Gulf of Finland style small seal harpoon head. The Arctic Museum Nanoq.
The hunting trips among sea ice were made possible in special sealing boats calledfälbåtar. The word fälbåt is a dialectal variant of the word färdbåt,meaning a travelling boat. As the name suggests, the boat was built for longroutes. The boat was fitted with a mast and sail and the stern was high and thekeel had a slant towards the prow. The specially design hull was capable of breaking through two inches of ice. The shape of the keel also made it easier topull the boat on top of the ice. Once pulled up on the ice the boat was used as a basecamp by the hunters who could remain with the boat for weeks until the icearound melted and they sailed home. Usually a hunt would start in late Marchand the hunters would return home in early May. Between 1400- and 1900s thesealing boat was the most abundant type of boat in the Gulf of Bothnia areabecause of its versatility in changing ice conditions. On the island of Bergöthe sealing boats were built of spruce, a light wood. According to a1600-century source the keel was made of reaction wood pine, which is a hardand resinous wood that slides well against the ice. A spring hunt could resultin a catch of several hundreds of seals. In 1910 two sealing boats from the Island ofReplot in the Vasa archipelago managed to bring in 500 sealskins during asingle spring hunt. This figure was, however, extraordinary and usually 100seals was considered anexcellent catch for a single boat.16. A early 20th century photo of a crew of seal hunters from Replot, posing on the ice in front of the boats along with their guns and seal spears or pikes.
The sealson the sea ice of the Gulf Bothnia were mainly shot with muzzle loading riflesmade by local gunsmiths. A hunter was all dressed in white and would approach aseal laying on top of a special hunting sledge which had the appearance of along ski called a Skridstång (Swe.).
17. A demonstration of the use of the Skridstång ski. The hunter is hidden by the whote cloth which only has a little hole for the gun. The Arctic Museum Nanoq.
The ski was fitted with a fork in which the gun was placed and it wasalso fitted with a piece of with cloth or a white calf hide which was strung upin front of the ski. This would enable the hunter to approach the seal withoutbeing seen. The ski was often fourmeters long and could be used to cross cracks in the ice. On some islands inÅboland a modified sledge would be used for a similar purpose. The previously mentioned seal spear became thesingle most important tool in seal hunting in the Gulf of Bothnia and it wasused to retrieve and pull out seals that had been shot but were able to slideback in to their breathing holes. The seal spear resembles a harpoon, but thehead is permanently fixed to the haft.
Sealhuntingwas a very arduous task before the advent of fire arms. An account byOlaus Magnuss in 1555 describes how hunters in, dressed in black skins, wouldmimic the behavior and bellowing of a seal on ice in order to advance on theirprey. The hunter was armed with a harpoon and once he was close enough to theprey he would leap up and hurl the harpoon at the seal. It is said that peopleof Runö island in the Roslagen archipelago were able to throw the harpoon withconsiderable accuracy at a distance of 20 fathoms (Swe. famn), equivalent of 38meters. It would seem more likely presume that 20 meter and less would be amore realistic distance for a hunter to attempt a kill. Dogs were also used tofind breathing holes on the pack ice. The Italian priest and traveler,Francesco Negri visited Sweden in 1663 and noted that dogs as large as smallbulls with oblong heads were used to hunt seals. The dogs were also reported tobark like wolves, have sharp teeth and have long hair on the eyebrows andaround the snout, resembling a mustache.However, the dogs used to track seals18. A caught seal pup is strapped in an hook-harness while the seal dog is observing. Suursaari in the Gulf of Finland in 1924.
Even on ice or on dry land, the grey seal was a formidable foe and clubbing it was no easy task. As weapon the primitive club or kölva were the most used. Once clubbed the seal became unconcius and the hunter proceeded to cut the jugular vein.The first strike had to be a clean hit as it was believed that a glancing blow resulted in the seal getting its blood in the stomach and would almost invincible. Another version of the same belief is that the seal would pull the lard over the head and thus protect himself from further blows.(Nyström 2000:72-73)
19. Hunters in the Gulf of Finland taking a brake amidst the pack ice and cooking some afternoon tea.
A story from Roslagen tells of how a large grey seal was laying on the ice, unable to get to open water. Seven men armed with kölvas attacked the seal but were unable to kill it as the seal was able to disarm all men by skillfully grabbing the kölvas in his jaws and then laying upon them. (Klein 1929:146)
A story from Utö island in Åboland involves a small group of men who ventured on the sea ice around the turn of the 19thcentury. One of the men spotted a large female grey seal at the small rock ofLillharu and managed to hit it across the head with his ice pick (Swe. Kölvå/Tjölva).The seal was not killed by the strike and the hunter proceeded to dispatch thetrashing seal with his knife. He stood on top of the animal, trying toturn the large seal on its back so that he could cut the jugular vein. In the turmoilthe seal managed to claw him with her paw across the leg resulting in a deep gash.The seal was eventually killed, but the wound demanded immediate treatment.There was a small fishing cabin on the island of Alu, about one kilometer fromLillharu and the company managed to drag their catch along with the woundedhunter to the cabin. Back then all hunters wore seal skin moccasins. The thin soles of the moccasins were prone to wear out during long walks and oftenneeded repairing. For this reason it was also customary for every hunter tocarry a needle and tarred cotton thread inside lining of their hats. The wound on the legwas sewn together using the same thread. The wounded hunter was able to walkback to Utö the following day and the wound eventually healed withoutcomplication.
20. Sealhunters from Utö island in the Åboland archipelago. Viktor Westerholm Sealhunting 1900.
The harpoon was replaced by the sealspear in the Gulf of Bothnia and the Kvarken as guns became more popular.An interesting method of hunting seals refered to as sealswimming was documented by Åke Rålamb in 1703 in the Roslagen archipelago. In this method a hunter would be transported as close as possible to island or a rock without disturbing the resting seals. The hunter would undress and get in to the water and proceed to approach the resting seals by swimming. The hunter was equipped with a long pole, often 5 or 6 meters long, on top of which was an harpoon tip. The hunter would approach as quietly as possible and once he was close enough he would try to stab at the seal. At this point his friend on the boat would try to come and help the swimmer dispatch the wounded seal. Rålamb marvelled over the strenght and dexterity of these swimmers, who often lived to an old age.
Seal as food source21. Different parts of the seal carcass and their culinary value. For many communities, especially in the Åboland archipelago seals were hunted mainly for their food value. Blood was also appreciated as food source and it was usual to insert a cloth or filling in to the wound of the killed sealso that blood would be retained within the animal. This method was only used if the seal was harpooned. It was believed that as theseal dies the heart will burstand the blood will collect in to the ribcage ofthe animal, from where it is collected by scooping. Blood was used mixed withrye flower as sausage stuffing or more often eaten as simple blood pudding.Seal blood was also consumed raw by the hunters if they needed to sustainthemselves while on the ice. Seal blood puddingmixed with pieces of seal blubber was a common delicacy. The meat of young seals was preferredover older individuals. The meat of an old grey seal was considered almostuneatable due to its strong taste.
Upon the return of the seal hunting party they were happily greeted by their families and the villagers. It was custom to arrange a arrival feast called the räsankalas. The term räsa, which is used in certain areas of the Swedish speaking Ostrobothnia, referes to the butchering of seal, more specifically the removal of the skin and fat from the body of the seal. As the hide and fat along with the entrails was removed the body was cut in half across the middle of the animal and the remaining two halves were cut in three parts, resulting in six pieces of meat excluding the head. The catch was divided among the hunters and all were given equal share, but the boat owner received a larger portion of the catch. (Nyström 2000:134-135)
22. A grey seal in the process of being buchered.
The head (I) could be cooked but not considered as a delicacy. The back flippers (A) were considered good as well as the front flippers (K). The back part (B) was considered excellent while the kidney section (C) was considered as good. The ribs (I) were less valued since there was little meat there. The blue part (E) was good and the shoulder (F) was excellent. The chest (G) was considered poor due to the small size of the piece, also the neck was not appreciated (H). (Klein 1929)
23. Grey seals are butchered on the beach at Vehkalahti, Finland in 1899.
Seal meat was also consumed during the long hunts, steaks from adult seals were commonly eaten when provisions ran low. The meat of pups was preferred to older individuals and was often used in soups. Seal liver has a good taste and was cooked especially in Ostrobothnia and Nyland.
Sealhunting equipment is displayed in the following museums along the coastline of Finland. Åboland The Archipelago Museum in Houtskär
Sagalund Museum in Kimito
Utö Museum
Pargas Local History Museum
Korpo Local History MuseumÅland Hunting and Fishing Museum of Åland, Eckerö
Local History Museum of Brändö
Maritime Museum, MariehamnOstrobothnia The Arctic Museum Nanoq, Jakobstad.
The Hunting and Fishing Museum of Bosund
Raahe Town Museum.
The Brage Open Air Museum in Vasa Malax Fishing and Hunting MuseumThe Museum of TankarNylandThe Rönnäs Archipelago Museum, PernåRead more 6 comments: Labels:Sealing Nov 2, 2017 Strömfors Bruk - The Old School Axe Maker in Finland
Among the larger iron works in Finland the Strömfors Bruk Iron Works and Forge is one of the least known to a larger public. The iron workshad a 250 year old history when the production was finally halted in 1950.Today the area with all its buildings remain as a protected heritage site andthe mill village is among the most visually attractive in Finland. Strömfors isa mere 1 and half hour drive away from the Finnish capital of Helsinki (Swe.Helsingfors). Strömfors used to be an independent municipality until it wasincorporated in to the larger municipality of Lovisa, a neighboring coastaltown.
1. Strömfors is a beautiful place to visit in summer.
The iron works was founded as part of a larger strategy by theSwedish crown to increase the production of iron and steel within the kingdom. Bythe end of the 16th century the Swedish rulers had realized thatiron production had to be modernized as bar iron became the new standard oftrade, replacing the medieval Osmund Iron, which was an wrought iron ball ofirregular shape. Expertise and finance from foreign countries was required toachieve the change over, also steelworks at the time worked with water wheelsand iron works had to be placed at suitable locations along waterways that powered the wheels and provided means to transport goods
2. Map of Strömfors from 1802. At the time the iron works only had a bar hammer and a forge indicated by nr 2. in the map.
Iron works and forges were also dependent on an ample accessof wood and by the 17th century, the high demand for coal hadresulted in the disappearance of forested lands in the vicinity of many Swedishiron works. These factors prompted the crown to establish new forges in theoutskirts of the kingdom and many forges were established in Finland. Some Finnishforges were also able to use local, less rich sources for iron, but for themost part the steel mills in Finland were processing iron ore originating frommines in Sweden.3. A photograph of blacksmiths working with bar hammers in the Upper Forge at Strömfors in the begining of the century..The nobleman Johan Creutz founded a bar iron mill inPetjärvi village in Pyttis parish in 1695. The forge was established in primelocation by the Kymmene River rapids, which remained unfrozen during the wholeyear. Also the site was surrounded by large forested areas. Conflicts betweenRussia in Sweden resulted in a new border being drawn in the peace treaty of 1743.The border divided the parish of Pyttis in to two halves along the westernbranch of the Kymmene River. The western part which remained in Swedishpossession was called Swedish Pyttis, in Finnish Ruotsinpyhtää, which is theFinnish name for Strömfors.4. Jacob af Forselles, one of the founders of Strömfors Bruk.The part of the iron bar mill which remained on the Swedishside of the border was purchased by Anders Nohrström and Jakob Forsell in 1744.The iron bar mill was also renamed Strömfors (Eng. Stream Rapid), which wastaken from the surnames of the new owners. In 1817 the Pyttis parish was also the name of the Steel mill. In 1750 the population of Strömfors was about1 300 and 10% were included in the Strömfors Forge workforce.
5. The product board displays everything that was made by Strömfors Bruk. This display stand won first price at the agricultural fair in Kuopio in 1906.During this time a forge, a saw and a mill were erected atthe site. Virgina af Forselles, the widow of the late Henrik Johan afForselles, took possession of Strömfors in 1781. She was only 31 at the timebut proved to be a strong-minded leader. She added a lot more buildings to thesite, such as the landmark building of Strömfors, the high red timbered housewhich she erected by the river. The af Forselles family remained in possession of Strömforsuntil 1876. In 1886 Antti Ahlström purchased Strömfors along with adjacent lands. Ahströmwas mainly focused on developing the sawmill. He did not attempt to modernizethe forge and the manufacturing process. The technical development of the forgehad been on a stand-still until it finally closed in 1950. The same simplewater driven hammers were in use for over 250 years.6. Demonstration of the water powered bar hammer at the Upper Forge in Strömfors. The Blacksmiths atStrömforsThe Strömfors iron works mostly produced iron bars andnails. The work was organized in two 12 hour shifts. The work only halted onSaturdays at 18:00 and would resume at the same time on Sunday. Often theworkteam was made up by two master blacksmiths and two journeymen. In the barand nail forge there were up to 4 or 6 blacksmiths.7. Old masters and young apprentises at work making oak nails in Strömfors,ca 1910.Among the first blacksmiths to arrive at Strömfors was masterhammer smith Hans Fernelius from Västmanland in Sweden in 1745 and a year latermaster hammer smith Olof Hierpe from Svartå Forge. The occupation ofblacksmith was passed down from father to son. The craft was mastered through anarduous and long process in which a young apprentice would gradually advance tothe position of a journeyman and beyond. A hammer smith was a title indicatingthat the blacksmith was skilled in using the water driven hammer. The office ofa hammer smith was regulated. The HammerSmith Regulations of 1766 (Swe. Hammarsmedsordningen) stipulated that theoffice should include an elder, a master, a master journeyman and a labourer. Afterseveral years working side by side with the master a journeyman was finallygiven the opportunity to prove his skills to the elder in an officialjourneyman test. After a successful test he could call himself master hammersmith. Ordinary people held the Strömfors blacksmiths in high esteem,perceiving them to be close to nobility. The blacksmiths also had a specialbench reserved for them at church. The blacksmiths guild remained a strong,independent and visible group within the social landscape of Strömfors.8. Senior workers at Strömfors Bruk ca 1920. The first three sitting from the left are blacksmiths.
There are two separate forges at Strömfors, the Lower- andthe Upper Forge. The Upper Forge was built in 1859. The large facility fitted10 furnaces, four water-powered nail hammers and two bar hammers. Long oak nails were made at the forge intended for use in at shipwrights or by the railway. The bar hammer was used to shape the iron ingot to a longslender iron bar. One of the original nail hammers have been moved to the LoweForge which is now a museum.9. Farming and forestry-equipment made by Strömfors bruk.Axes, shovels, scythe blades and other farmingequipment was also manufactured at the Upper Forge. After WW1 focus shifted on themanufacture of forestry equipment. The forge also experienced a small boomduring the 1940s as iron became scarse and the blacksmiths at the forge wouldtransform scrap iron brought by customers in to whatever tool or item theyneeded. The old technique used at the forge was versatile and the skill levelof the blacksmiths was high due to the versatile manufacturing tasks they hadto master as well as the knowledge they had accumulated over the generations. Production at the forge came to an end in 1950. The lastorder carried out by the forge was the production of specialty nails needed forthe restauration work at the fortress of Sveaborg at Helsinki.10. A Bila axe made by Strömfors marked with a "1" and the official brand stamp.The brandingcontroversy between the Billnäs and Strömfors companiesThe Strömfors Bruk Product Catalog of 1904 includes 17 axemodels of which many are very similar to popular models made by the BillnäsBruk Company. Strömfors bruk did have a few models of its own such as thenumber 8 and the number 16. Some of theother models were so similar that this created tension between the companies,especially around the turn of the 20th century. Billnäs had steppedup production with a more industrialized process with American made machinehammers, producing as much as 2000 axes per day. Finland was at the time anautonomous dutchy within the Russian empire and many Billnäs axes wereexported to the growing Russian market. Strömfors Bruk was only 100 km from theRussian border and had a geographical advantage to Billnäs Bruk which wassituated in Southwest Finland. Strömfors bruk, with its 200 year oldtechnology could not match the volumes of axes produced by Billnäs but stilltensions mounted and in 1902 the Billnäs Bruk Company accused Strömfors Brukof plagiarism.
11. The Billnäs brand label from 1900.
Billnäs Bruk claimed that the shape of the Strömfors axes andeven the company label attached on the heads were too similar to the Billnäslabeled axes. As proof of the claim twoaxes from both companies were presented to the court and the judge concludedthat the size, shape as well as the label of the two were very similar. Thedefendant, the widow Ahlström claimed that the Strömfors label used on the axespredated the registered Billnäs stamp and she was unaware that the label was used. Sheclaimed that the manager of the forge, Wallin, had introduced the label withouther knowledge or consent. She maintained also that there was little resemblancebetween the two labels.12. The controversial Strömfors Bruk label which was still in use in 1904.
The accusations of plagiarism were finally resolved in theTurku High Court in 1904. According to the verdict Strömfors Bruk had to removethe controversial label from all its produce and pay all legal costs of the Billnäs representatives. The court ruled that the use of the label was notintentional and the widow Ahlström was not charged. Billnäs Forge had used itstrademark label since 1895, but formally registered it in 1900. Strömforsintroduced their label in 1900 but failed to register it.
13. Some of the axes featured in the only known Strömfors catalog of 1904.The court battle seemed to cast a long shadow on themarketing strategy of Strömfors. Billnäs Bruk and Kellokoski ads promoting axes are seen among the pages in many early 20th century Finnish newspapersand journals but Strömfors ads are scarce. It wouldappear that Strömfors axes were produced on a relatively small scale, oftenpreordered by local clients or exported to Russia. Strömfors Bruk mainly marketed its produce in fairs and other events in the east and northeast region of Finland. There are also indicationsthat single orders for axes were accepted by the blacksmiths.13. Strömfors wide axe model nr 18.
Strömfors axesToday surviving Strömfors axes are very hard to find outsideof Eastern Finland. They are often mistaken for Billnäs or Kellokoski axes. Thelevel of quality of these axes does not seem to be any less than that achievedby the other forges, but there are no official tests or other documentationthat includes Strömfors made axes. The few axes which I have come across and havebeen able to positively identify as Strömfors produce show normal signs of wearwith no visible cracks or other quality issues. The level of workmanship isimpressive, given the fact that these axes were crafted by hand using oldblacksmithing techniques.14. A rusty Strömfors model felling axe. The corrotion has completely eaten away the stamp on the left sida of the blade.The axes on display in the Strömfors museum exhibitin the Lower Forge seem very well made with clean and straight lines. I havenot been able to find any pictures of the axemaking process at Strömfors, butthe process of forging an axe in Strömfors must have been more or less identical toprocesses in other forges.15. Official Strömfors brand stamp.
All the stages of blacksmithing an collard axe is documentedin an old film from the Swedish Wira Bruk in 1923 and can be considered analogous to how axes were made in the Upper Forge at Strömfors Bruk.The long history of the forge at Strömfors enabled blacksmiths to hone their profession across the generations and theaccumulated level of craftsmanship attained by the 1950s must have been at avery high level. 16. The Strömfors Pori model nr 3 also has a counterpart in nr 11 in the Billnäs catalog. Axes made at Strömfors were available in three differentfinishes; blackened, polished or as grinded. The general style of the axes madeat Strömfors reflect the forges location in Eastern Finland and many of their models wereunique to the forge, such as the Vyborg model nr2, the Padasjoki model nr 6, theStrömfors model nr 16 and the Carelian model nr 17. There seems to be somevariations in crafting the axes and accommodating customer preferences.
17. The wide model T-axe nr 5 is a heavy duty felling axe.
A photoof a special order axe presented as gift to a Finnish commandant by hisworkcrew in 1943 is a variation of the nr 17 with a wider blade and a different collar than usual.Also there is only one hewing axe featured in the catalog of 1904, but the two hewing axesin the museum do have some differences in blade angle as well asin the shape of the lower part of the collar. This does suggest that individualblacksmiths had considerable influence on the appearance of the axe andvariations did occur more commonly in Strömfors. The catalog of 1904 does not reflectthe full range of axe models produced at Strömfors. One Bila-axe marked with nr1 instead of 13 suggests that the models varied over time.
18. The axe head to the left is a Carelian model nr 17 by Strömfors, the Bila axe is also likely to have been made at Strömfors. The Strömfors axes are unique in a sense that they werecrafted using a virtually unchanged production technology for more than 250years. Anyone lucky enough to come across a Strömfors Bruks axe can appreciatethe legacy of generations of blacksmiths working at Strömfors.
19. An axe fit for a general. This one was given as a gift by the workers at Rukajärvi during the war with the Sovjet Union in 1943. Special order axe by Strömfors bruk. AcknowledgementsI am grateful for all the assistance I have received in collecting material from my friendly collegues at Lovisa Town Museum. Sources and further reading Siren, Olle. Strömfors bruk 1695-1984. A. Ahlström. 2. uppl. Helsingfors. Hufvudstadsbladet 23.11.1902 no 319BTapio :Suomen metsänhoidon ystävien seuran aikakauskirja 1912,01.01 no 5.Online sourceshttps://www.loviisa.fi/sv/kultur-och-fritid/museer/bruksmuseet-i-stromfors/ retrieved 02.11.2017https://sv.wikipedia.org/wiki/Str%C3%B6mfors retrieved 02.11.2017http://hiski.genealogia.fi/ Strömfors parish records.Wira Bruk - https://www.youtube.com/watch?v=bPid76-ji-It=424sImages1. Photograph of Strömfors. Marcus Lepola 2017.2. Map -Petjärvi;Petjärvi och Lill-Abborfors eller Strömfors bruk: Karta öfver egorne medbeskrifning 1803-1803 (B28a:1/4-9). Finnish National Archives.3. Strömfors museum exhibit.Marcus Lepola 2017.4. Painting in the museum exhibit in Strömfors. Marcus Lepola 2017.5. The museum exhibit in Strömfors. Marcus Lepola 2017.6. Strömfors bruk. Marcus Lepola 2017.7. Photograph in the museum exhibit in Strömfors. Marcus Lepola 2017.8. Photograph in the museum exhibit in Strömfors. Marcus Lepola 2017.9. Strömfors museum exhibit.Marcus Lepola 2017. 10. Strömfors museum exhibit.Marcus Lepola 2017.11. Billnäs - Registeringstidningför varumärken 1900.22.12 no 162. 12. Strömfors bruk. Marcus Lepola 2017.13. Strömfors bruk. Marcus Lepola 2017. 14. Pargas Local History Museum, Marcus Lepola 2017.15. Strömfors -Registeringstidning för varumärken1899 28.10.1899 no 12116. Strömfors bruk. Marcus Lepola 2017.17. Strömfors bruk. Marcus Lepola 201718. Marcus Lepola 2017.19. Finnish Defence Force Photo Archive.
1 comment: Labels:Finnish axe,Strömfors axeLocation:Strömfors bruk, 07970 Lovisa, Finland Older PostsHomeSubscribe to:Posts (Atom)Själen Seal Hunting in the Northern Baltic Sea
Foreword The following post is intended as a more academic source of information on traditional sealing in Finland and the Northern Baltic...
The Finno-Ugric Bow Two Finno-Ugric bows, the one to the left still needs to be wrappen in birch-bark. The bows used in Finland and parts of Scandinavia ...Headhunting Billnäs "12" Axes Growing knowledge of Finnish made axes has created a wide market for these vintage tools. The Kemi-model axe made by the Billnäs Forge in...All you ever wanted to know about traditional Finnish axes. Finnish axe history Finnish axes have recently made an r reappearance on the contemporary bushcraft arena. Long known and even iconic to...Search This BlogPagesHomeArticles on Academia.eduSkäri - Living Heritage VidsThe AuthorAbout meMarcus LepolaDoctoral student, researcherView my complete profileAll blogposts 2018(1) January(1)Själen Seal Hunting in the Northern Baltic Sea 2017(1) November(1) 2016(1) December(1) 2015(2) September(1) August(1) 2014(2) March(1) January(1) 2013(1) August(1) 2012(5) December(2) June(1) April(1) March(1) 2011(6) November(1) March(3) February(2) 2010(5) December(1) November(1) October(3)LabelsAlaskan bowsAlutiiq bowArchipelago studiesArctic archeryAxe sheathBillnäs 12Billnäs axebirch bark axe sheatBirch bow.cable backed bowDenaina. Athapascan bowEskimo bowFinnish axeFinnish axesFinnish axes. Billnas nr 12. Logging competition. Lumberjack. Aulanko.Hanti skiKellokoski 12Kellokoski axe. Bushcraft axe. Bil-yxa.Mariefors brukMouse trapSealingSiberian skiSki polesSnowshoesStrömfors axeToy-bowTraditional Finnish Axes.wooden skis.FollowersÅbo Akademi UniversityReport Abuse
TAGS:Wilderness Northern Skills Traditions and
<<< Thank you for your visit >>>
Websites to related : Accueil - Église Orthodoxe Celt
keywords:Église Orthodoxe Celtique, eoc-coc.org
description:
AccueilAccueil - Église Orthodoxe CeltiqueQui sommes-nous ?Communion des Églises
keywords:
description:
keywords:
description:
skip to main | skip to sidebar Wednesday, March 08, 2017
I am obsessed with horror mo
keywords:
description:
HomeAboutExploreBlogGuidesHow it WorksContact UsBad Credit Payday LoansApply NowReceive a £100 - £5,000 Payday Loan, same day
keywords:
description:
Wednesday, May 27, 2015 Garbage Bag Hula SkirtsWe have been singing and dancing to "Under th
keywords:pediatric, brain cancer, children, research, support, families, cure, cause
description:The Christopher Brandle Joy of Life Foundation provid
keywords:ObitMichigan.com Search
description:ObitMichigan.com is dedicated to serving families who have lost their loved ones. Founded in 2009 ObitMic
keywords:direct mailing, communicatiebureau, direct mail, drukwerk, enveloppen
description:Interlinea communicatiebureau voor de vormgeving van uw dru
keywords:
description:
Navigation A to Z Teacher Stuff: Downloads, Printables, Lesson Plans, Teaching Themes, Forums, Worksheet Makers
keywords:
description:
Home About News Giving Contact Menu Academics Current Undergraduate Students Advising Employment Diversity, E
Hot Websites