The Volvo Resource: brickboard.com

Time 2020-11-20 03:04:06

Web Name: The Volvo Resource: brickboard.com

WebSite: http://www.brickboard.com

ID:121353

Keywords:

Volvo,The,Resource,

Description:

The Volvo Owner's Resource.The BrickBoard is a unique site custom built exclusively for folks who love their Volvos: great forums, spam free, anonymous posting, anonymous email to protect you from spam, and most of all great people.[RWD] [200] Part number hell: Hall sender""" It was all I could do to not take the AMM home as well, but they're not giving that stuff away, and 50 bucks is a little more spare change than I have this week."""Glad to hear you fixed your problem.That's Life Insurance man, Life Insurance on the cheap for your 84 240 rebuild.[RWD] Forum SoftwareThis needs much more attention to the layout. I can also make different views and I'm likely to make one much more familiar. I like the table view because it handles large amounts of data and is easily configurable.The BrickPix views are examples of stuff I'm doing more manually and I think they look great. Getting techy, they also "lazy load" so it should be a very snappy experience for users. I'm using this approach on the classifieds stuff as well since the content fits well on the "car...[RWD] Cruise Control Vacuum Pump Testing?Yes, I have tested them. I got a three wire connector from a self serve scrap yard. One wire is ground (Y-R), the second wire (GN-Y) powers the vacuum pump, the third wire (OR) vents the vacuum system. Leaving the vacuum pump connected to the servo I connected the ground and powered the system. The rubber servo should collapse, pulling on the throttle. Disconnecting the power to the pump, the servo shouldn't move. Touching the power to the orange wire should vent the system and allow the servo ...[RWD] [700] [1988] dragging brakes; new calipers, pads and rotors: NOW WHAT?I don t normally post on anything but on the 240 tab but what you have is a master cylinder port problem like was posted so well by James.Others said contamination, but you have had everything changed and flushed to get rid of bad things. Stuff may have moved during the process to make it more of an adventure in mechanics. (:)You struck a chord with me as I m a man who hates to hear story s about how women are treated. It ...[AWD] [V70-XC70] [2001] Intro to my new V70 and questionsQ1: The last VR I changed was in a 1998. I removed the top coolant hose to get better access to the back of the alternator. Disconnected the battery ground, unplugged the wires on the back of the alternator, removed the 3 screws holding the black cover. The VR is held in with 2(?) Phillips head screws.I have no idea what you are referring to regarding the 'large' plastic bolt'. Do not remove it.Q2: You may have a dirty injector or two. A couple of bottles of injector cleaner might he...[RWD] Jarrod, Please restore the edit functionInternal Server ErrorThe server encountered an internal error or misconfiguration and was unable to complete your request.Please contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error.�]ERR: 32: Warning in Perl code: DBD::mysql::db do failed: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to us...[RWD] [900] [1991] New rear main seal tensionThe tool is meant to be removed after the seal has been installed so that the edge of the seal can't get folded under during installation. It does appear you have the seal in the same position as the original and it should be moved further in. The groove is not meant to be there--it is wear. - Dave[AWD] [S70] No compression all cylindersZero on all cylinders? Got to be something in the head.Totally toasted head gasket? Cracked head? Warped head? Could be, from driving with a bad water pump. But strange that it would pop up after several successful drives, and zero out all cylinders.Best guess? Timing error after re-assembly after the water pump change. Interference engine. Bent valves on all chambers=zero compression. Not sure about the economics of repairing a 22 year old car with that kind of damage.Before I d...Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

TAGS:Volvo The Resource 

<<< Thank you for your visit >>>

Brickboard.com has been serving the Volvo community since 1997. Discuss any automotive topic with thousands of other Volvo enthusiasts.

Hot Websites