GPON Solution - GPON Solution site is a Complete GPON Networking Solution.

Time 2021-11-05 09:06:16

Web Name: GPON Solution - GPON Solution site is a Complete GPON Networking Solution.

WebSite: http://gponsolution.com

ID:222369

Keywords:

site,Solution,GPON,Networking,Complete,is,

Description:

keywords:
description:GPON Solution site is a Complete Networking Solution.
HomeGpon Huawei OLT/ONT ZTE OLT/ONT Alcatel OLT/ONT LsCable OLT/ONT Fiberhome OLT/ONT BDCOM OLT/ONT PHYHOME OLT/ONT Troubleshooting command Gpon Alarm Gpon Products OLT ONT Networking Cisco Switch Router OSPF BGP MPLS Juniper HuaweiServer Windows Server Linux ServerForumYoutube ChannelAbout Me August 15, 2017 GPON 13 Comments GPON SOLUTION Support Price List GPON SOLUTION Support Price List:

GPON SOLUTION is not a Company, It is a personal website. It is my Freelancing Job. I provide par-time logical support about GPON Technology like OLT/ONT Configure support by CLI U2000 NMS.

Below are the GPON SOLUTION Support Price List:

---

---

For Command line Configuration Support
Huawei OLT Basic Management configure: $50 USDHuawei ONT Internet Service configure training by CLI: $100 USDHuawei OLT/ONT VoIP Service configure training by CLI: $100 USDHuawei OLT/ONT IPTV Service configure training by CLI: $100 USDHuawei ONT ETH port Trunk / Multiple Tag VLAN configure by CLI: $30 USDHuawei ONT ETH port QinQ VLAN configure by CLI: $30 USDONT to ONT Layer2 Bridge configure within same PON port or same OLT: $30 USD

---

---

Third-party ONT add with Huawei OLTEach Huawei OLT Third-party ONT add feature Unlock Charge: $150 USD  to  $300 USD range depends on OLT Firmware Version Board.
For Huawei MA5600 series OLT Like: MA5608T, MA5603, MA5683, MA5680, MA5600 Model OLT (Control Board MCUD/MCUD1, SCUN SCUH ).For Huawei MA5800 series OLT Like: MA5800-X2, X7, X15, X17 (Control Board MPSC MPLA ).

After unlock OLT You can use all 3rd-party brand ONT, like: ZTE, Alcatel/NOKIA, EDGE-CORE, ASKY, Fiberhome, C-DATA, Park, UFiber Nano G, GL-COM, PHY-HOME, Dasan Zhone, V-SOL, VNPT, Huahuan, Blu-Castle, Mikrotik: SFP ONU module and more unspecified Vendor GPON ONT with Huawei OLT.

---

---

Huawei GPON NMS Support

Huawei iManager U2000 NMS for MA5600, 5680, 5603, 5683, 5608T MA5800 X series all OLT

U2000 R009 Version NMS Installation Price: $100 USDU2000 R015 Version NMS Installation Price: $300 USDU2000 R017 Version NMS Installation Price: $500 USDU2000 R018 Version NMS Installation Price: $600 USDHuawei ONT Internet Service configure training by NMS: $100 USDHuawei OLT/ONT VoIP Service configure training by NMS: $100 USDHuawei OLT/ONT IPTV Service configure training by NMS: $100 USDHuawei ONT ETH port Trunk / Multiple Tag VLAN configure by NMS: $30 USDHuawei ONT ETH port QinQ VLAN configure by NMS: $30 USDHuawei ONT Remote WAN WiFi Configure By U2000 NMS: $30 USD (For Internet service like PPPoE, DHCP, Static IP etc by HG8245H gateway ONT.)Huawei OLT Root  Password Recovery: $100 USD*Others are depends on service time.

Note: Difference Between R009, R015, R017 R018 Version U2000 NMS is, you can configure ONT WiFi SSID password by R015/R017/R018 NMS, but not possible by R009 version. Also R009 not support MA5800 x series OLT.

Difference Between Huawei U2000 R009 R014 R015 R017 R018 Version NMS (PDF) Click Here.

---

---

Huawei OLT SNMP MIB file price: $30 USD

MA5600TV800R013C00SPC105_MIB

---

---

Huawei OLT Firmware Upgrade

Huawei OLT Firmware Upgrade price: $50~$100 USD per OLT.

I have below listed Firmware MA5600 MA5800 Series Model OLT)

V800R008C02SPH321(C02SPC300)_for_SCUN
V800R010C00SPH107_for_SCUN
V800R011C00SPC102_for_SCUN
V800R013C00SPH207_SCUN
V800R013C10SPH210_SCUN
V800R015C00SPC100_SCUN
V800R015C00SPC101_SCUN

V800R012C00HP1115_MCUD
V800R013C00SPH207_MCUD
V800R013C10SPH210_MCUD
V800R015C00SPC100_MCUD
V800R015C00SPC101_MCUD

Note: R017 R018 Version Firmware upgrade price: $100-$200 USD

V800R017C10SPH202_SCUN
V800R018C00SPH102_SCUN

V800R017C10SPH202_MCUD
V800R018C00SPH102_MCUD

V800R018C00SPH102_SCUH
V800R018C00SPH102_SCUB
V800R018C00SPH102_SCUK
V800R018C00SPH102_SCUL

---

---

Huawei GPON OLT/ONT Configuration Guide PDF Hedex Library File Price: $100 USD

---

---

If you interested to Buy Service, knock me below E-mail Skype:

E-mail: shahed.cse06@gmail.com

Skype: shahed.israr

---

Payment Methods:

1st option: International Master/VISA Credit Card.

2nd option: Payoneer / PayPal with 6% Fee.

---

---

Tweet Read More March 9, 2017 GPON, U2000 2 Comments U2000 Huawei iManager U2000 NMS BUY for GPON U2000 Huawei iManager U2000 NMS BUY for GPON OLT/ONT Monitoring Management.

If anybody want to Buy Huawei iManager U2000 NMS for GPON OLT/ONT Monitoring Management, you can contact with me. Below are the details:

I have U2000 R009, R014, R015 R017 Version NMS.

R017 is latest support all feature. I have two type license (ESN Without ESN version). For ESN version you did not get any ESN License error massage.

My Without ESN license not Official that causes its have some limitation, such as NMS login time it sometime give you popup massage look like Failed to match the license file ESN license not match with system you can not upgrade/update NMS to new/latest version.

But it will not effect your normal working. you can work everything by it look like original. many people are using this non-official version NMS without having major problem.

[If you need logical support to install or learning about U2000 service, like ONT Internet configure, VoIP, IPTV, Remote ONT WAN configure from U2000 etc, need extra charge depends on service]

You can install this NMS any Pc/Server, but for best performance you need good hardware, look like below.

Server Hardware: Intel® Xeon® Processor E5-2670 (2.60GHz).
{For Virtual PC need 4 Logical core 2 socket per core.}
RAM 8/16GB, HDD 300 GB or SSD 256GB.
C: Drive need 100GB free space.
D: Drive need 150GB free space.
Keep NMS software file/folder in D drive.

Operating System: Windows server 2008 R2 standard version with English Language.

Huawei GPON U2000 NMS Setup Preparation

Its Validity is: unlimited

Its license not original that causes it sometime/login time give you a popup massage look like above imageFailed to match the license file otherwise everything ok.

---

If you interested to buy this NMS, knock me below E-mail Skype:

E-mail: shahed.cse06@gmail.com

Skype: shahed.israr

For GPON SOLUTION Support Price List Click Here

---

U2000R009 NMS + Installation Basic Setup: $100 USD
U2000R009 + Setup + Support to ONT Internet Configure Training: $200 USD
U2000R015 Without ESN Version NMS Installation Charge: $300 USD
U2000R017 Without ESN Version NMS Installation Charge: $500 USD
VoIP: $100 USD
IPTV: $100 USD
*Others are depends on service time.

---

Payment Methods:

1st option: International Master/VISA Credit Card.

2nd option: Payoneer / PayPal / Skrill / Payza or Western Union.

---

Tweet Read More March 18, 2016 GPON, Huawei Config No comments Huawei GPON OLT Configuration Huawei GPON OLT Configuration:

Here is the some steps for Huawei GPON OLT Configuration. May be it will help you how to configure ONT in OLT some basic troubleshooting.

GPON Technology Diagram Overview

Huawei OLT Basic Configuration

Create DBA profile in Huawei OLT

Create Traffic Table in Huawei OLT

Register Huawei ONT in Huawei OLT by CLI

GPON FTTH ONT Configure by U2000 NMS

How to configure Huawei ONT in Huawei OLT(Video)

GPON Triple Play Service Configuration (Internet,WiFi, VoIP, IPTV CATV)

Configure Trunk port in Huawei ONT

Configure QinQ VLAN in Huawei OLT

Huawei ONT Bandwidth Configure

Troubleshoot commands of Huawei ONT

Troubleshooting Command Huawei OLT Part-1

Firmware/Patch Upgrade Huawei OLT

Delete Huawei ONT from OLT

Huawei OLT all Configuration backup procedure

Huawei OLT Factory Default/Erased All config

All Configuration Restore Huawei OLT

Huawei OLT Board List details

User Create Huawei OLT

Control Board Load-sharing Configure

Huawei OLT some configure

Huawei OLT Command list.

Tweet Read More March 13, 2021 GPON, GPON Document No comments Board Status and Description Huawei OLT

Today I will discuss about Huawei OLT Board Status and Description, When New OLT power on, new board add or if reboot OLT then we see many board status in OLT like Failed, Auto_find, Auto_load, Config, or Normal etc state.

We can see OLT board status by display board 0 or below command format.

display board frameid [ frameid/slotid ]

This command is used to query the information about the boards in an entire subrack or the details of a specified board. To query the slot ID, name, status, daughter board information, port information, and online/offline state of the board after performing an operation on the board, run this command.

Usage Guidelines

You can query the board status to check whether the current status of the board is normal. The board states are as follows.

Board StatusStatus and DescriptionNeed Handling or Not?NormalThe board is in the normal state.No need to proceed.Auto_loadThe board is in the automatic loading state. When a service board is inserted in a service slot, the board reports its version information to the system. If the version of the board software is different from that stored in the flash memory of the control board, the system automatically loads the software from the flash memory to the board.No need to proceed.Auto_findThe board in the auto-find state.The board can be used only after you run the board confirm command to confirm the board.ConfigThe board enters the configuration state after it is confirmed.No need to proceed.FailedThe board is in the failed state.The fault needs to be rectified.

The causes for the board failure are as follows:                       
•An offline board is added. In this case, insert a board of the same type into the corresponding slot. Several minutes later, check whether the board is in the normal state.
•Loading the board program fails. In this case, run the display io-packetfile command to check whether the corresponding software package of the board is loaded to the flash memory of the control board. If the corresponding software package is not loaded, load the corresponding board software.

If the fault persists after the preceding operations, contact Huawei for technical support.
MismatchThe board is in the type mismatch state.You need to run the board delete command to delete the type of the board in the slot. Then, the system will automatically recognize the board type.HTempShutdownThe board is in the high-temperature shutdown state.No need to proceed. This is an energy-saving feature. The board is automatically shut down if the board temperature exceeds the threshold. By default, the board recovers 15 minutes later.ManualShutdownThe board is in the manual shutdown state.

This is an energy-saving feature. After you run the board power-off command to power off the idle board, the board status is displayed as ManualShutdown.
If you need to change the shutdown state, you can run the board power-on command to power on the board.ESavingShutdownIndicates that the board is in the energy-saving shutdown state.

This is an energy-saving feature. The board enters the energy-saving shutdown state in the following case:
If you run the system energy-saving mode deep command to set the energy-saving mode to the deep energy-saving mode, online and normal service boards that are not configured with any service will be powered off after 15 minutes, and then the boards enter the energy-saving shutdown state.
No action is required for this state. Boards that are not configured with any service are automatically powered off because the deep energy-saving mode or optimal energy-saving mode is applied to these boards. If you configure service data for these boards or modify the energy-saving mode to the basic energy-saving mode or standard energy-saving mode, the board will be automatically powered on after a period of time.ProhibitedThe board is in the prohibited state. Before finding, diagnosing, and rectifying a fault of the faulty board, run the board prohibit command to prohibit the board. Then the board status is displayed as Prohibited.You can run the undo board prohibit command to un-prohibit the

huawei>display board 0                                                      { cr>||K> }:                                                                                                                                                    Command:                                                                                display board 0                                                         -------------------------------------------------------------------------       SlotID  BoardName  Status          SubType0 SubType1    Online/Offline          -------------------------------------------------------------------------       0                                                                               1       H901XGHDE  Failed                               Online                  2       H901GPSFE  Failed                               Offline                 3       H901OGHK   Failed                               Online                  4       H901EDSH   Failed                               Offline                 5                                                                               6                                                                               7                                                                               8       H902MPLAE  Standby_failed                       Offline                 9       H902MPLAE  Active_normal                                                10      H901OXHD   Auto_find                                                    11                                                                              12                                                                              13      H901GPSFE  Auto_find                                                    14                                                                              15                                                                              16                                                                              17                                                                              18      H901PILA   Normal                                                       19                                                                              -------------------------------------------------------------------------     

Example: To query the information about all boards in subrack 0 in the user mode, do as follows:

System Response:

The system displays the queried result when the command runs successfully.The following table describes the parameters in response to this command.

ParameterDescriptionSlotIDIndicates the slot ID.BoardNameIndicates the board model.StatusIndicates the running status of the board. It can be Failed, Auto_find, Auto_load, Config, or Normal. See the board states in Usage Guidelines for details.SubType0Indicates the daughter board 0 that is attached to the board.SubType1Indicates the daughter board 1 that is attached to the board.Online/OfflineIndicates the online/offline state of the board. It can be Online or Offline.

Tweet Read More December 19, 2020 GPON, Huawei Config No comments 3rd-Party ONT Add Feature Unlock Huawei OLT

3rd-Party ONT Add Feature Unlock Huawei OLT to support other brand ONT in Huawei OLT. If anybody Interested want to unlock Huawei OLT contact Skype: shahed.israr

Huawei OLT by default not support 3rd-party other brand ONT. If anybody configure other brand 3rd-party ONT in Huawei OLT. If ONT status shows offline. Also reason of offline: Insufficient ONT interoperability access license. Then you need to unlock your Huawei OLT. After OLT unlock its release lock ONT status shows online.

I have Below OLT Unlock solution:
MA5600T/MA5680T/MA5603T/MA5683T: (SCUN/SCUK/SCUH)
MA5608T: (MCUD/MCUD1)

MA5800-X2: (H901/H902MPSC)
MA5800-X7/MA5800-X15/MA5800-X17: (H901/H902MPLA)

You will get ONT below status if OLT not unlocked.

MA5608T(config)#display ont info 0 1 6 0

---

F/S/P : 0/1/6
ONT-ID : 0
Control flag : active
Run state : offline
Config state : initial
Match state : initial
Reason of offline : Insufficient ONT interoperability access license
DBA type :
ONT distance(m) :
ONT last distance(m) :
ONT battery state :
Memory occupation :
CPU occupation :
Temperature :
Authentic type : SN-auth
SN : 4E42454CB15A62DA (NBEL-B15A62DA)
Management mode : OMCI
Software work mode : normal
Isolation state : normal
Description : ONT_NO_DESCRIPTION

After Unlock OLT you get ONT status Online normal like below.

Tweet Read More April 3, 2020 Huawei Config, ONT, U2000 2 Comments How to Configure ONT Wi-Fi Access Service by U2000 Configure ONT Wi-Fi Access Service by U2000

This section describes how to configure ONT Wi-Fi access service through the NMS (U2000).

PrerequisitesThe user has the operator authority or higher to configure ONT Wi-Fi.The OLT and the NMS communicate with each other properly.NMS is able to discover an online ONT and Internet access services are configured.ProcedureIn the Main Topology, double-click the required OLT in the Physical Root navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.Choose GPON > GPON Management from the navigation tree.On the GPON ONU tab page, set the filter criteria or click to display the GPON ONUs.Select an ONT in the normal state, right-click the ONT, and choose maintain ONT to configure ONT Wi-Fi remotely.On the navigation tree wifi configuration，click Query query information about SSIDs created for this ONT. Select a specified SSID to query information about Configuration in Detail, Advance Configuration, Authentication Configuration, as shown in the following figure.Configuration in Detail:Select a specified SSID, modify corresponding configuration items, and click Config to the device. Parameter Description SSID name Indicates the name of a wireless network. It is used to distinguish different wireless networks. It consists of a maximum of 32 characters, excluding Tab characters. Enable SSID Indicates whether to activate a connection. Associated Device Nubmer Specifies the number of connected wireless terminals. Range: 1-32. Broadcast SSID Enables or disables the SSID broadcast function. If the option box is selected, it indicates that the SSID broadcast function is enabled. The ONT periodically broadcasts its SSID, that is, the name of the wireless network. In this way, any wireless terminal can find and then connect to this wireless network. Tweet Read More September 24, 2019 GPON, ONT, Uncategorized No comments Huawei ONT User Password for HG EG Series ONT Huawei ONT User Password for HG EG Series ONT

Default settings:

Administrator (installation and maintenance personnel):EG Series：User name: EpadminPassword: adminEpHG Series：User name: telecomadminPassword: admintelecomCommon user (terminal user): EG Series： User name: Epuser Password: userEpHG Series： User name: root Password: admin

NOTE:

The common user account can be used to query the service status. For ONTs that support Wi-Fi and the USB storage function, the common user account can be used to configure services such as Wi-Fi and home sharing.

Default Username Password Huawei ONT

Huawei forum ONT user name

Tweet Read More April 26, 2019 GPON, GPON Document No comments GPON, XG-PON, XGS-PON What is the difference?

GPON, XG-PON, XGS-PON, What is the difference?

XG-PON, 10-Gigabit-capable passive optical network, provides asymmetric 10G GPON transmission (Maximum downstream line rate: 9.953 Gbit/s, Maximum upstream line rate: 2.488 Gbit/s ).XGS-PON, 10-Gigabit-capable symmetric passive optical network, provides symmetric 10G GPON transmission (Maximum downstream line rate: 9.953 Gbit/s, Maximum upstream line rate: 9.953 Gbit/s ).Specification Differences Between 10G GPON and GPONThe following table lists specification differences between the two technologies.SpecificationsGPON10G GPONXG-PONXGS-PONWavelengthDownstream: 1480-1500 nmUpstream: 1290-1330 nmDownstream: 1575-1580 nmUpstream: 1260-1280 nmDownstream: 1575-1580 nmUpstream: 1260-1280 nmCenter wavelengthDownstream: 1490 nmUpstream: 1310 nmDownstream: 1577 nmUpstream: 1270 nmDownstream: 1577 nmUpstream: 1270 nmMaximum Line RateDownstream: 2.488 Gbit/sUpstream: 1.244 Gbit/sDownstream: 9.953 Gbit/sUpstream: 2.488 Gbit/sDownstream: 9.953 Gbit/sUpstream: 9.953 Gbit/sMaximum Physical Transmission Distance

60 km

NOTE:

The physical reach is defined by split ratio, optical module size, and fiber quality.

100 km

NOTE:

The physical reach is defined by split ratio, optical module size, and fiber quality.

100 km

NOTE:

The physical reach is defined by split ratio, optical module size, and fiber quality.

Maximum Split Ratio

1:128

NOTE:

The actual split ratio depends on the optical module model and fiber distance.

1:256

NOTE:

The actual split ratio depends on the optical module model and fiber distance.

1:256

NOTE:

The actual split ratio depends on the optical module model and fiber distance.

No Wavelength Overlap Between GPON and 10G GPONFigure 1 shows the wavelength distribution of GPON and 10G GPON.
10G GPON Can Co-exists with GPON in the Same ODN

Figure 2 shows the GPON and 10G GPON can coexist in the same ODN with wavelength division multiplexing (WDM) mode.

Tweet

Read More April 14, 2019 GPON, GPON Document No comments Huawei ONT Naming Rules

Huawei ONT Naming Rule:

This post describe how Huawei ONT each model name provide with its specification.

Product examples:

HG8247H: The upstream transmission mode of this ONT is GPON or EPON. It has 2 voice ports and 4 LAN ports (GE ports). It supports USB, CATV, and Wi-Fi.

Overall naming rule: 2 letters+4 digits+(optional) 2 suffixes

Format: A+B+C1+C2+C3+C4+[D]+[E]

Field Description

FieldIndicationAUpstream transmission mode of an ONT:
H: PON-based upstream transmission
L: LAN-based upstream transmissionBUpstream transmission technology of an ONT:
G: current mainstream technology (EPON/GPON ONT)
N: next-generation technology (10G PON ONT)
S: smart ONTC1UNI-side port and IoT protocol compliance status:
8: mainstream ONT with PON upstream transmission
2: ZigBee-compliant ONTC2Number of voice ports. For example, 0 indicates no POTS ports, and 2 indicates 2 POTS ports.C3Number of LAN ports. For example, 0 indicates no LAN ports, and 4 indicates 4 LAN ports.C4Function support, indicated by a decimal value converted from a 3-bit binary number. 0 in binary indicates that a function is not supported, while 1 in binary indicates that a function is supported. USB, CATV, and Wi-Fi refer to the USB, CATV, and Wi-Fi functions of an ONT.
For example, if all these 3 functions are supported, the binary number is 111 and the corresponding decimal value is 7.DHighlighted feature or customization. For example:
C: customized for China Telecom
M: customized for China Mobile
H: GE LAN port
S: outdoor
V: dual-band Wi-Fi, for example, HG8145V5 supports 11n 2×2 MIMO(2.4G) and 11ac 2×2 MIMO(5G)
Q: dual-band Wi-Fifor example, HN8055Q supports 11n 3×3 MIMO(2.4G) and 11ac 3×3 MIMO(5G)
W: dual-band Wi-Fi for example, HG8245W supports 11n 2×2 MIMO(2.4G) and 11ac 4×4 MIMO(5G)EExtra information. For example:5 indicates a V5 platform product, and s indicates an XGS-PON product.

Note: For a version customized for China Unicom, the ONT name starts with 83, and the subsequent digits indicate the number of Ethernet ports and number of POTS ports. The name of a gateway ONT ends with R.

Product examples:

HG8247H: The upstream transmission mode of this ONT is GPON or EPON. It has 2 voice ports and 4 LAN ports (GE ports). It supports USB, CATV, and Wi-Fi.HN8255Ws: The upstream transmission mode of this ONT is XGS-PON. It has 2 voice ports and 5 LAN ports. It supports USB and dual-band Wi-Fi (11ac 44 MIMO).

Tweet

Read More Older posts Payment Link with 6% Paypal Fee: Facebook Like Archives Archives Select Month March 2021 (1) December 2020 (1) April 2020 (1) September 2019 (1) April 2019 (2) August 2017 (1) May 2017 (2) April 2017 (3) March 2017 (2) February 2017 (1) December 2016 (2) November 2016 (1) October 2016 (1) September 2016 (3) August 2016 (4) July 2016 (2) June 2016 (13) May 2016 (3) April 2016 (31) March 2016 (14) February 2016 (11) January 2016 (15) December 2015 (3) November 2015 (18) September 2015 (1) February 2014 (1) July 2012 (28) June 2012 (9) May 2012 (4) April 2012 (17) March 2012 (8) February 2012 (11) January 2012 (8) November 2011 (2) September 2011 (3) August 2011 (2) July 2011 (7) May 2011 (4) April 2011 (2) March 2011 (10) February 2011 (15) January 2011 (19) Categories Popular Posts Recent Posts GPON SOLUTION Support Price List 4:21 pm By Shahed GPON SOLUTION Support Price List: GPON SOLUTION is not a Company, It is a personal website. It is my Freelancing Job. I provide par-time logical support Read More U2000 Huawei iManager U2000 NMS BUY for GPON 10:04 pm By Shahed U2000 Huawei iManager U2000 NMS BUY for GPON OLT/ONT Monitoring Management. If anybody want to Buy Huawei iManager U2000 NMS for GPON OLT/ONT Monitoring Read More Huawei GPON OLT Configuration 11:55 am By Shahed Huawei GPON OLT Configuration: Here is the some steps for Huawei GPON OLT Configuration. May be it will help you how to configure ONT in OLT Read More Board Status and Description Huawei OLT 2:19 pm By Shahed Today I will discuss about Huawei OLT Board Status and Description, When New OLT power on, new board add or if reboot OLT then we see Read More 3rd-Party ONT Add Feature Unlock Huawei OLT 10:04 pm By Shahed 3rd-Party ONT Add Feature Unlock Huawei OLT to support other brand ONT in Huawei OLT. If anybody Interested want to unlock Huawei OLT contact Skype: Read More How to Configure ONT Wi-Fi Access Service by U2000 2:28 pm By Shahed Configure ONT Wi-Fi Access Service by U2000 This section describes how to configure ONT Wi-Fi access service through the NMS (U2000). Prerequisites The user has the Read More Huawei ONT User Password for HG EG Series ONT 9:19 pm By Shahed Huawei ONT User Password for HG EG Series ONT Default settings: Administrator (installation and maintenance personnel): EG Series： User name: Epadmin Password: adminEp HG Series： Read More GPON, XG-PON, XGS-PON What is the difference? 12:09 am By Shahed GPON, XG-PON, XGS-PON, What is the difference? XG-PON, 10-Gigabit-capable passive optical network, provides asymmetric 10G GPON transmission (Maximum downstream line rate: 9.953 Gbit/s, Maximum upstream line Read More Tag Cloud

Anything in here will be replaced on browsers that support the canvas element

ONT GPON olt bgp Huawei OLT BDCOM Juniper BDCOM OLT u2000 PON factory default VLAN Huawei ONT OSPF VOIP sip dmvpn ZyXEL Root Password Bandwidth H.248 PHYHOME ping ping command Router factory-default bandwidth limit traffic table vlan-mapping huawei MA5600T olt Lscable ONU

Visitor Counter Visit Today : 128 Visit Yesterday : 155 Hits Today : 335 Who's Online : 5 2021 GPON Solution Powered by Gpon Solution. | Theme Designed by: Shahed Israr. error: Content is protected !!

TAGS:site Solution GPON Networking Complete is 

<<< Thank you for your visit >>>

GPON Solution site is a Complete Networking Solution.

Hot Websites